Jensen Inert Products - PTFE Pressure Relief Valves

Pressure Relief Valves are constructed with a 100% pure PTFE Valve Body and Valve Plug. The single O-Ring design allows user selection of EP, Viton or Kalrez, depending on the flowing media. The Pressure Relief Valve is factory configured for a 10 psi to 90 psi pressure range. The relief valve is fully adjustable within this range by simply adjusting the upper Socket Hex Adjustment Screw and locking in place with the associated locking nut. The Pressure Relief Valve is configured with three Upper Housing and Lower Base options: Polyvinylidene Fluoride ("PVDF"), Polypropylene ("PP") or Anodized Aluminum ("AA") as shown.

Unit of Measure

Items	VPR01040104-PEA EP (Ethylene Propylene) O-Ring Type PTFE Pressure Relief Valve	VPR01040104-PKA Kalrez O-Ring Type PTFE Pressure Relief Valve	VPR01040104-PVA Viton O-Ring Type PTFE Pressure Relief Valve	VPR01040316-TEA EP (Ethylene Propylene) O-Ring Type PTFE Pressure Relief Valve	VPR01040316-TKA Kalrez O-Ring Type PTFE Pressure Relief Valve
Orifice Size (in.)	N/A
End Size (in.)	N/A
End Connection	N/A FNPT	N/A FNPT	N/A FNPT	N/A Tube	N/A Tube
O-Ring Type	N/A EP (Ethylene Propylene)	N/A Kalrez	N/A Viton	N/A EP (Ethylene Propylene)	N/A Kalrez
Upper Housing and Base Plate Material	N/A Aluminum
Port Size	N/A 1/4 in
Orifice Size	N/A 0.250 in	N/A 0.250 in	N/A 0.250 in	N/A 0.188 in	N/A 0.188 in