Jensen Inert Products
Jensen Inert Products
3773 NW 126th Avenue
Coral Springs, Florida 33065
Toll Free: 1-800-446-3781
Tel: 954-344-2006
Fax: 954-344-2008
Email: jensen@jenseninert.com
Website: www.jenseninert.com
Print Back
NICKEL PLATED HR® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM
  • Nickel Plated to resist damage from most aggressive chemicals.
  • 1/4" Barbed Stem for attaching tubing, helps keep tubing in place.
  • Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve.
HR
Unit of Measure
Items HR
GST1000-0606J
6 x 6 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem 		HR
GST1000-0707J
7 x 7 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem 		HR
GST1000-0610J
6 x 10 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem 		HR
GST1000-0909J
9 x 9 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem 		HR
GST1000-1010J
10 x 10 Inch (in) Size Tedlar® Gas Sampling Bags with Nickel Plated HR® ON/OFF Valve with 1/4" Diameter Barbed Stem
Film Material N/A Tedlar®
Capacity N/A 0.6 L N/A 1.0 L N/A 1.2 L N/A 2.0 L N/A 3.0 L
Size N/A 6 x 6 in N/A 7 x 7 in N/A 6 x 10 in N/A 9 x 9 in N/A 10 x 10 in
Film Thickness N/A 0.002 in
Bags Per Package N/A 10
Valve Stem Diameter N/A 1/4 in Barbed
Valve/Fitting Features N/A
  • Nickel Plated
  • Barbed stem for attaching tubing.
  • Leak resistant seal in closed position.
Film Key Features N/A Tedlar® film has very low gas permeation levels for most compounds, and high tensile strength. Bags resist puncture in the field. 2 mil Tedlar® film is an economical alternative to FEP bags. Tedlar® is much less permeable than FEP and is unaffected by the chemical components of gases generally sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptans. Continuous use temperature from -98 to 400 ºF (temperature limit depends on fittings used). Required for many EPA testing methods.
Suggestion N/A
  • Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
  • During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
  • Bags should not be filled to more than 80% of their maximum volume.
  • Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
  • Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
  • Bags should not be used to collect reactive or unstable compounds.
  • When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties N/A
  • Low gas permeation levels - Most gases
  • High tensile strength
  • Withstands temperatures up to 400 ºF
  • Unaffected by the chemical components of gases commonly sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon, and mercaptons
  • Tensile Strength 8000 psi
Film Advantages N/A
  • Less permeable than FEP, PFA, and TFM
  • Bags resist puncture in the field
  • Less expensive than FEP, PFA, and TFM film
  • Recommended in many EPA testing methods
Film Limitations N/A
  • Exhibits background levels of DMAC and phenol
  • High permeation rate for CO2
  • Relatively high permeation rate for O2
  • *NOTE: We offer bags specially conditioned to remove DMAC and phenol from Tedlar®
Valve/Fitting Benefits N/A
  • Resists damage from most aggressive chemicals.
  • Helps hold tubing in place.
  • Prevents sample loss in closed position. However, when stem is not closed, sample air passes into ambient air outside valve.
Use with Tubing Size (ID) N/A 3/16 in
Minimum Order Quantity N/A 10