Print Back
Made of the most chemically Inert and non-contaminating materials available, FEP and PTFE. Contains no fillers or plasticizers, will not corrode or pit, is non-leaching, and complies with EPA regulations.
  • Flexi-Bottom Design Resists Leaks - Precision machined ball-valve seat minimizes leakage. Precision ground PTFE check valve is self-cleaning, to minimize fouling. Ball check valve design provides superior seating in wells with high silt content.
  • Interchangeable Parts - Mix and match parts make Jensen Inert Reusable Bailers ideal for both portable and dedicated applications. Various Top and Bottom options, as well as other accessories, allow you to expand and custom design your system to suit your individual needs.
  • Easy To Clean - All components easily dissemble for thorough cleaning, and quickly reassemble, so more of your time can be spent sampling. Rounded threads eliminate sharp angles where contamination collects and can be difficult to remove.
  • Sturdy Design - Jensen Inert Reusable Fluoropolymer Bailers are built withstand tough conditions encountered in the field. Bailer walls are 1/8" thick Clear FEP, which will not collapse or crack, even after repeated use. Tops are designed to resist weakening where the suspension cord is attached. Bottoms have extra material below the check valve to protect the ball and its seat from scratches, which could result in leaks. Bailers can rest upright with ball seated.
  • Quality Assurance - All components are precision machined for exact fit, eliminating costly extra seals. No oils or other lubricants are used in the manufacturing process. All bailers are leak tested, washed in phosphate free detergent and visually inspected prior to shipping.
  • Also Available: 1-3/4" OD, 3/4" OD and 7/16" Reusable Bailers
1" O.D. Heavy Duty Reusable Fluoropolymer Bailers and Components
Unit of Measure
1 

Catalog Number

Item Descripiton

Material

Overall Length

Capacity

BAI-0080-SO N/A Bailer with Side Openings (2) on Top and Open Bottom - Ball Free to Roll Inside Bailer N/A Fluoropolymer N/A 14 3/4 " N/A 80 cc
BAI-0080-OP N/A Bailer with Open Style Top and Bottom with Pin - Captive Ball Inside Bottom N/A Fluoropolymer N/A 14 3/4 " N/A 80 cc
BAI-0080-SP N/A Bailer with Side Openings (2) on Top and Bottom with Pin - Captive Ball Inside Bottom N/A Fluoropolymer N/A 14 3/4 " N/A 80 cc
BAI-0250-SO N/A Bailer with Side Openings (2) on Top and Open Bottom - Ball Free to Roll Inside Bailer N/A Fluoropolymer N/A 40 1/2 " N/A 250 cc
BAI-0250-OP N/A Bailer with Open Style Top and Bottom with Pin - Captive Ball Inside Bottom N/A Fluoropolymer N/A 40 1/2 " N/A 250 cc
BAI-0250-SP N/A Bailer with Side Openings (2) on Top and Bottom with Pin - Captive Ball Inside Bottom N/A Fluoropolymer N/A 40 1/2 " N/A 250 cc
BAI-0080-B N/A Bailer Body, 80 CC Capacity, 13 inch Long x 1 inch O.D N/A Fluoropolymer N/A 13 " N/A 80 cc
BAI-0250-B N/A Bailer Body, 250 CC Capacity, 39 inch Long x 1 inch O.D N/A Fluoropolymer N/A 39 " N/A 250 cc
BAI-0100-O N/A Standard Top, Open Style N/A Fluoropolymer N/A N/A
BAI-0100-S N/A Standard Top, Dual Side Opening Style N/A Fluoropolymer N/A N/A
BAI-0120-C N/A Check Valve Top - For Point Sampling N/A Fluoropolymer N/A N/A
BAI-0200-O N/A Standard Bottom - Allows Ball to Roll N/A Fluoropolymer N/A N/A
BAI-0200-P N/A Standard Bottom with Captive Ball N/A Fluoropolymer N/A N/A
BAI-0150-V N/A Variable Flow Bottom - Complete N/A Fluoropolymer N/A N/A
BAI-0150-S N/A Variable Flow Bottom, Stopcock Only N/A Fluoropolymer N/A N/A
BAI-0150-B N/A Variable Flow Bottom, Body Only N/A Fluoropolymer N/A N/A
BAI-0716-B N/A Ball, 7/16 inch Diameter for Bottom N/A Fluoropolymer N/A N/A
BAG-0319-10 N/A Bailer Bag, Poly, 3 mil x 19 inch Long/10 Bag N/A Polyethylene N/A N/A
BAG-0345-10 N/A Bailer Bag, Poly, 3 mil x 45 inch Long/10 Bag N/A Polyethylene N/A N/A
SUS-3320-W N/A Suspension Wire, FEP Covered/Ft N/A Fluorinated Ethylene Propylene (FEP) N/A N/A
SUS-CAP-S N/A FEP Shrink End Caps for Suspension Wire N/A Fluorinated Ethylene Propylene (FEP) N/A N/A
SPO-3320 N/A Empty Spool for Suspension Wire N/A Plastic N/A N/A
Unit of Measure
1