NICKEL PLATED HR® ON/OFF VALVE WITH 1/4" DIAMETER BARBED STEM
  • Nickel Plated to resist damage from most aggressive chemicals.
  • 1/4" Barbed Stem for attaching tubing, helps keep tubing in place.
  • Leak resistant seal in closed position, prevents sample loss. However, when stem is not closed, sample air passes into the ambient air outside valve.
Request Information
Unit of Measure
Items
HR

6 x 6 Inch (in) Size ALTEF Gas Sampling Bag with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem
HR

7 x 7 Inch (in) Size ALTEF Gas Sampling Bag with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem
HR

6 x 10 Inch (in) Size ALTEF Gas Sampling Bag with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem
HR

9 x 9 Inch (in) Size ALTEF Gas Sampling Bag with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem
HR

10 x 10 Inch (in) Size ALTEF Gas Sampling Bag with Nickel Plated HR® ON/OFF Valve with 1/4'' Diameter Barbed Stem
Film Material N/A ALTEF
Capacity N/A 0.6 L N/A 1.0 L N/A 1.2 L N/A 2.0 L N/A 3.0 L
Size N/A 6 x 6 in N/A 7 x 7 in N/A 6 x 10 in N/A 9 x 9 in N/A 10 x 10 in
Film Thickness N/A 0.003 in
Note N/A Valve is Nickel Plated
Locking Combo® is a registered trademark of Jensen Inert Products, Inc.
Swagelok® is a register trademark of Swagelok, Inc.
Jaco® is a registered trademark of Jaco Manufacturing, Inc.
HR® is a registered trademark of Halkey Roberts, Inc.
Tedlar® is a registered trademark of E.I. Dupont
Bags Per Package N/A 10
Additional Information N/A ALTEF is a proprietary fluoropolymer film developed specially for the air sampling market. ALTEF meets or exceeds many of the desired characteristics of Tedlar®.
  • Unlike Tedlar®, ALTEF does not exhibit background levels of DMAC and phenol.
  • Low VOC and sulfur background levels.
  • Similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs.
  • Developed as an alternative to Tedlar® film for most gas sampling applications.
  • Contains no additives, fillers or pigments.
  • Choice of ten fitting options.
  • Minimal adsorption.
  • Superior storage for organics.
  • Inherently pure.
ALTEF is not recommended for ketones or esters in high concentrations (>30%)
ALTEF is not suitable for storing H2S.
Our Multi-Layer Foil bags are the best choice for collecting and storing H2S.
Valve Stem Diameter N/A 1/4 in Barbed
Valve/Fitting Features N/A
  • Nickel Plated
  • Barbed stem for attaching tubing.
  • Leak resistant seal in closed position.
Film Key Features N/A
  • ALTEF is a proprietary fluoropolymer film developed specially for the air sampling market.
  • ALTEF meets or exceeds many of the desired characteristics of Tedlar®.
  • Unlike Tedlar®, ALTEF does not exhibit background levels of DMAC and phenol.
  • ALTEFexhibits similar stability properties as Tedlar® for a wide variety of compounds, including most VOCs.
  • Low VOC and sulfur background levels.
  • Contains no additives, fillers or pigments.
  • Minimal adsorption.
  • Superior storage for organics.
  • Abrasion Resistant.
Suggestion N/A
  • Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
  • During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
  • Bags should not be filled to more than 80% of their maximum volume.
  • Charcoal (Black) Tedlar® bags should be used when sampling light sensitive compounds
  • Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
  • Bags should not be used to collect reactive or unstable compounds.
  • When shipping bags, do not air-ship unless the bags are stored in a pressurized area.
Film Properties N/A
  • Developed specifically for gas sampling applications
  • Chemically inert to most acids, aliphatic and aromatic organic compounds, chlorinated solvents, and alcohols
  • Maximum operating temp: 260 ºF
  • ALTEF bags are made of 0.003" thick film.
  • Tensile Strength 6100 psi
Film Advantages N/A
  • Suitable for sampling most VOCs and many sulfur compounds
  • Low VOC background
  • Longer sample storage times than most other bag materials
  • Does not exhibit background levels of DMAC or phenol, as Tedlar® does
  • Lower permeability than Tedlar® to CO2, N2, CH4
  • Superior resistance to solvents
Film Limitations N/A
  • More permeable to most compounds than Tedlar® (0.003" thick versus 0.002" for Tedlar® Bags)
  • Not suitable for sampling ketones and esters in high concentrations (>30 %)
  • Less resistance to UV light than Tedlar®
  • Many sulfur compounds should be analyzed within 24 hours.
  • More expensive than Tedlar®
Valve/Fitting Benefits N/A
  • Resists damage from most aggressive chemicals.
  • Helps hold tubing in place.
  • Prevents sample loss in closed position. However, when stem is not closed, sample air passes into ambient air outside valve.
Use with Tubing Size (ID) N/A 3/16 in
Minimum Order Quantity N/A 10