N/A Valve is Stainless Steel.
Locking Combo^® is a registered trademark of Jensen Inert Products, Inc.
Swagelok^® is a register trademark of Swagelok, Inc.
Jaco^® is a registered trademark of Jaco Manufacturing, Inc.
HR^® is a registered trademark of Halkey Roberts, Inc.
Tedlar^® is a registered trademark of E.I Dupont

N/A

• Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions.
• Stainless Steel valve body and nut
• 3/16" OD Stainless Steel stem
• Thumbscrew to lock valve in open or closed position

N/A Tedlar^® film has very low gas permeation levels for most compounds, and high tensile strength. Bags resist puncture in the field. 2 mil Tedlar^® film is an economical alternative to FEP bags. Tedlar^® is much less permeable than FEP and is unaffected by the chemical components of gases generally sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon and mercaptans. Continuous use temperature from -98 to 400 ºF (temperature limit depends on fittings used). Required for many EPA testing methods.

N/A

• Before use, thoroughly flush bags with ultra-pure nitrogen or zero air
• During sampling, Fluoropolymer tubing and Fluoropolymer faced septums must be used in order to prevent sample loss.
• Bags should not be filled to more than 80% of their maximum volume.
• Charcoal (Black) Tedlar^® bags should be used when sampling light sensitive compounds
• Do not store compounds in bags long term due to the possibility that chemicals may adsorb onto the bag surface.
• Bags should not be used to collect reactive or unstable compounds.
• When shipping bags, do not air-ship unless the bags are stored in a pressurized area.

N/A

• Low gas permeation levels - Most gases
• High tensile strength
• Withstands temperatures up to 400 ºF
• Unaffected by the chemical components of gases commonly sampled, like carbon monoxide, sulfur dioxide, hydrogen sulfide, radon, and mercaptons
• Tensile Strength 8000 psi

N/A

• Less permeable than FEP, PFA, and TFM
• Bags resist puncture in the field
• Less expensive than FEP, PFA, and TFM film
• Recommended in many EPA testing methods

N/A

• Exhibits background levels of DMAC and phenol
• High permeation rate for CO₂
• Relatively high permeation rate for O₂
• *NOTE: We offer bags specially conditioned to remove DMAC and phenol from Tedlar^®

N/A

• Stainless Steel construction provides durability and ability to withstand use in austere sampling conditions.
• Thumbscrew to lock valve in open or closed position
• Sample contacts only Stainless Steel.